This part works on Alpine Aftermarket Radios with Model numbers that begin with "CDM-" or "TDM-" and are Versatile-Link Ready.
The ALP/M-POD iPod Adapter Cable will convert the 8-Pin M-Bus CD Changer input on Alpine Versatile Link™ Aftermarket Radios to an iPod dock connector. With this adapter installed you can connect your iPod directly to the radio for a clean audio connection. Best of all, this inexpensive adapter will even charge your iPod while it's plugged in and the ignition is "ON" and freedom to control everything via the iPod itself, giving you access to all playlists and menus using the iPod scroll wheel. This cable provides an easy, inexpensive method of connecting iPod products to select Alpine M-BUS Auxiliary Ready Radios.
Compatibility & Notes: [These requirements must be met for this part to work]
1. The ALP/M-POD is compatible with the following Alpine M-BUS VersatileLink™ (V-Link™) Radios [Versalite-Link is a menu option that switches the CD Changer port to AUX. Without this feature the Radio will not recognize this cable].
2. The ALP/M-POD cable is 6 ft. long with an 8-pin DIN plug on one end and Apple dock connector on the other.
3. The ALP/M-POD takes the place of Alpine CD Changer. Alpine CD Changer (if present) must be disconnected.
4. The ALP/M-POD Plays and Charges the iPod: Mini, Photo, *Nano (1G, 2G, 3G), Video & Classic. Will play but will *NOT* charge the iPod Nano (4G and Up).
5. NOT COMPATIBLE WITH iPhone, iPod Touch--- See the iP-ALPM adapter cable.
6. Text display and controls are not available on the Alpine radio -- display and control remain with the iPod.
7. *Don't purchase this cable for the factory radio in Honda, Mazda, Mitsubishi, Volvo, BMW, Jaguar, Nissan, Land Rover, Ford, Porsche, Chrysler etc. Factory Radios require a vehicle specific iPod Adapter.
1. The ALP/M-POD dock will PLAY all iPods with dock connectors except iPhone (All), iTouch (All)
2. The ALP/M-POD will play but will *NOT* charge the iPod Nano (4G, 5G,6G ).
3. Alpine Radios with 8-pin CD Changer port does *NOT* guarantee compatibility. In order for the radio to recognize this cable it must be "VERSATILE LINK READY" (menu option that allows switching between CD Changer and Aux).
Setting the AUX Mode (i.e. CDM-7874)
1. Press and hold the SETUP button for at least 3seconds.
2. Press the |◄◄ or DN or UP ►►| button to select the AUX mode.
3. Press the BAND button to toggle the mode between AUX ON and AUX OFF.
4. Press the SETUP button to return to normal mode.
5. To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment. → TUNER → CD → AUX
NOTE :When AUX ON is selected, a CD Changer cannot be used.
|
|
