Product Description: The MAZ/PC-ALP allows the integration of Alpine M-Bus Changer to select 2002-06 Mazda radios with external CD Changer Controls. Once installed the interface and Alpine CD Changer are controlled via the OEM (factory) radio Controls buttons. This interface is compatible with Alpine M-bus changers CHM-S601, CHM-S611, CHM-S620, CHM-S630 or Alpine CD/MP3 Ai-Net CHA-S634 (KCA-130b Ai-Net to M-Bus adapter is required). Compatible radios must have external CD Changer Controls and this 16-PINconnector on the back to or the radio for the interface cable.
Instead of CD Changer interface you may also use the MAZ/PC-ALP as an auxiliary input adapter.
In order for the MAZ/PC-ALP to work as an Auxiliary audio input it must be used in conjunction with ONE of the following cables: KCM-122b (RCA terminal), ALP/M-3.5M (3.5mm terminal), ALP/M-POD (iPod dock terminal) or the dual input AUXMSTRv3 for connection of up to two audio devices (RCA terminals).
COMPATIBILITY & NOTES: (please read before purchasing this part )
1. The MAZ/PC-ALP is compatible with the select 2001-06 Model/Year vehicles listed in the pull-down menu above (a vehicle selection is required).
2. All listed radios must have external CD Changer controls and a 16-Pin CD Changer connector on the back of the radio.
3. 2004-Up Mazda 6 radios are not compatible because the +Bus signal is lost. These radios require a slight modification for the interface to work.
4. 2004-06 RX8 Radio must have firmware Ver 9.55 or above. [To determine software version: Turn on the radio, push and hold the Text button, then press and hold Preset 1 button to display version].
5. The Mazda single CD or 6-CD Changer radios are not compromised or disabled by this interface.
Click here for INSTALLATION DIAGRAM.
Footnotes:
† Radios MUST have 16-pin connector. Vehicles equipped with 20-pin connector -- [ see our FRDN-AUX interface].
How to connect play and charge your iPod to the compatible Mazda Radio?
Purchase the MAZ/PC-ALP and ALP/M-POD to play and Charge* your iPod on the car stereo. Keep in mind that the aforementioned cable will play but will not charge the iPhone (3G*), Nano(4G*), Touch (2G*). If you have one of these iPods we recommend using the MAZ/PC-ALP in conjunction with the ALP/M-RCA and the IS75
See this auxiliary input adapter installation tutorial.
1. Radios must have firmware 9.55 or higher to work the auxiliary function.
2. The MAZ/PC-ALP is an AUDIO adapter and because of that it will not Charge, or display text information on the radio and compatible with the specified Mazda model/years listed in pull-down menu above.
 |
 |
8-PIN DIN
Connects to the Alpine 8-PIN CD Changer Cable OR to the 8-PIN Auxiliary input cable (i.e ALP/M-3.5M etc).
|
 |
10-pin Molex connector
Connects to the Molex plug on the PIE vehicle specific harness (included)
|
Disclaimer:
Disclaimer: All products sold by Discount Car Stereo.com are tested and optimized for vehicles in the United States. You may, at your own risk purchase and install these part in vehicles that do not meet USA Standards, however Discount Car Stereo.com will not be liable for damage or compatibility issues that may arise. All products purchased for vehicles outside the USA are not returnable. It is the customer's responsibility to retain an installation technician with adequate knowledge and experience of the vehicle into which the equipment will be installed.
 
|