
Tired of the same old radio commercials or cassettes from yesteryears? Upgrade 1995-98 Porsche CR-1 & CR-2 radios to support Bluetooth.
Using a phone in any way while driving can be dangerous, and if your Porsche still has the original CR-1 or CR-2 radio; then it lack support for more attractive modern media formats such as Bluetooth. The BT3-CR12 (formerly A2DIY-CR12) add-on module works on Porsche CR-1 & CR-2 radios to allow (1) Hands-Free calling profile (HPF) (2) Audio streaming profile (A2DP) , (3) Wireless audio control profile (AVRCP) and (4) USB charging. Once installed, users are able to safely answer/end calls, stream from favorite applications (e.g. Apple music, Pandora, Spotify, SiriusXM, Tune in etc.), track up/down using the "SEEK" buttons on the radio and keep devices charged thanks to the built-in 5V/2A USB charging port (optional dash mount USB extension cable is available here.) After initial pairing and upon entering vehicle; your smart device will automatically pair to the module hidden behind the dash. This clean solution leaves no wires on or around the dash and is the accessory you want if looking to add Bluetooth features while also retaining the original Porsche radio.
» Bluetooth® 4.2 support for Hands-free & music streaming profiles.
» Work on Porsche CR-1 and CR-2 cassette radios in vintage 911, 964, 993, 944, 968
» Auto-reconnect/disconnect upon entering/exiting vehicle.
» Adaptive electric condenser cartridge high sensitivity, low impedance, anti-noise microphone.
» Stream from music application while simultaneously using a GPS application for turn-by-turn directions (Music mutes during guidance)
» Stream internet music services such as Apple music, Deezer, Spotify, SiriusXM, TuneIn, YouTube, Line music, Tidal, audiobook, Podcast, GPS etc.
» Replaces remote/external CD changer (if present).
» New! Bluetooth Wireless Audio Control (AVRCP) allows the radio or steering wheel "SEEK" buttons to change track.
» New! Bluetooth Wireless Audio Control (AVRCP) allows the radio or steering wheel "SEEK" buttons to answer/reject call.
» Optional: 6 ft. dash mount USB extension cable (Click install guide below for details)
[To avoid costly returns, It is important to observe all requirements, warnings and install guide information prior to purchase.]
1. Exclusive to 1995-98 Porsche 911, 964, 993, 944, 968 with a CR-1 or CR-2 Tape radio. Not applicable to any other Porsche radio.
2. Connects directly to the 13-pin "CD" port on the back of the radio.
3. CD changer (if present), must be disconnected and will no longer function. Purchase our BTA-CR12 to retain CD changer.
» Bluetooth module (2" x 2" x".75) x1
» Microphone with visor clip on 10 ft. cable x1
» Installation harness x1
Optional: 6 ft. dash mount USB extension cable (Click install guide below for details)
Footnotes: [See drop-down for reference]
*Exclusive to Porsche CR-1 and CR-2 cassette radios only.
Avoid costly returns. Please review your INSTALL GUIDE and frequently asked question prior to ordering.
1. Exclusive to 1995-98 Porsche with CR-1 and CR-2 cassette radios. CD changer (if present) must be disconnected.
2. This module/kit must first be assembled (built by hand) after which time it is then shipped using shipping method selected at checkout.