Bluetooth streaming add-on for select 1995-05 GM pre-wired with 10-pin "CD" plug.
Apple is not the only one ditching the headphone jack but you don't have to ditch the original GM radio in order to keep up! The BLU-GM2 works in select 1995-05 Buick, Cadillac & Oldsmobile pre-wired with a 10-pin factory plug (reserved for optional CD changer). The required 10-pin plug can be found in vehicles trunk/hatch, console, glovebox, armrest etc. Warning: Factory 6/10/12-disc changer (if present); must be disconnected and will no longer play -- purchase our BTA-GM2 if you with to retain use of the CD changer. The BLU-GM2 provides a clean solution that leaves no wires on or around the dash and is the accessory you want if looking to stream music applications including Pandora, Apple music, GPS and other important applications without investing in a new radio or altering the look and feel of the factory dash components.
» Supports Bluetooth 4 for any Smartphone, Tablet etc. with A2DP profile Does not support HPF (hands-free calls)
» Direct connection to 10-pin "CD" plug in trunk/hatch, glovebox, armrest etc. If vehicle does not have a 10-pin plug; purchase our A2D-GM32 instead.
» Auto pair/unpair upon entering/exiting vehicle.
» If navigating, GPS prompts temporarily interrupt playback to announce turn-by-turn direction
» Stream from internet sites such as Pandora, Spotify etc. Does not support hands-free calls.
» All controls remain with audio device. Radio buttons (except volume/tone controls) do not apply.
» Ideal for those who prefer a wireless connection from Smartphone, Tablet, CarPlay etc.
» Optional wireless remote control (Click the Install guide link below for details).
[These issues or circumstances may affect compatibility of our product with your radio or vehicle.]
1. Compatible with select 1995-05 Buick, Cadillac & Oldsmobile radios listed in drop-down with a "Source" button and 10-pin "CD" plug. CD changer (if present) must be disconnected)
2. If vehicle has a functioning CD changer you wish to retain; purchase our BTA-GM2 instead.
3. If vehicle is not pre-wired with a 10-pin "CD" plug; and radio has a 32-pin port; purchase our A2D-GM32 instead.
4. The radio in compatible vehicle (see drop-down menu), must have a "SOURCE" button on faceplate and pre-wired 10-pin"CD" plug. (Don't ignore these requirements)
5. Connects at the 10-pin "CD" plug location (e.g. armrest, glovebox, console, hatch, trunk etc.) - Radio removal not required.
6. The "CD" or "TAPE" player built-into AM/FM radio remains functional.
» Main module x1 (3"x 3.5"x 1")
» 10-pin Installation harness x1
» Accessory wire (red) x 6 ft.
» Optional wireless remote control (Click installation guide link below for details)
Footnotes: [See drop-down menu for reference]
* All vehicles must have a 10-pin "CD" plug in glovebox, hatch or armrest to be compatible-- CD Changer (if present) must be disconnected.
Avoid costly returns. Please read entire INSTALL GUIDE and frequently asked questions prior to ordering.
1. Connects to pre-wired 10-pin CD changer plug (Not to radio).
2. Supports Bluetooth music streaming. Not for Hands-Free calls (HFP)
3. This kit must first be assembled (built by hand) after which it is then shipped using shipping method selected at checkout.
